How to Choose the Right Heating and Cooling School near Camak Georgia
Once you have come to a decision on a career as a heating and cooling professional, the next action is to locate an HVAC trade school near Camak GA. But with so many to choose from, how do you decide on the best one to receive the training that you need? Many prospective students will make their decision based exclusively on the cost of tuition or how near the school is to their home. Although these are important concerns, they are not the only ones to evaluate. A few of the other factors that you need to research are the graduation completion rates of the HVAC schools, their reputations, and if they are accredited by professional trade organizations. Those and other criteria will be addressed in more detail later in this article. But before we explore how to pick an HVAC vocational school, let’s take a look at what a heating and air conditioning specialist does to become a licensed skilled tradesman.
How to Become an HVAC Professional
HVAC is an acronym that is widely used in the industry that stands for “Heating, Ventilation and Air Conditioning”. HVAC contractors specialize in the installation, maintenance and repair of central air conditioners, furnaces, boilers, water heaters and heating systems. As skilled tradesmen, they are typically mandated to be licensed, however each state and local municipality has its own requirements. Acquiring professional certification is not required, but an optional means for Camak GA HVAC technicians to prove that they are highly skilled and experienced in their area of expertise. There are multiple respected certifications within the trade that are offered. Below are some of the significant ones.
- North American Technician Excellence (NATE). NATE is a nationally recognized certification for HVAC techs. The certification is earned by passing a competency exam and may be earned in one or more specialties.
- HVAC Excellence. This certification offers both a professional and a master specialist credential. 2 years of professional experience in addition to passing a comprehensive examination are required for the professional level certification. Master specialists must have three years of experience together with a passing score on the professional level exam. Similar to NATE, certifications are provided in multiple specialties.
- EPA Section 608. This certification is mandatory for specialists that handle refrigerants. There are 3 types of certification obtainable, one for small appliances, and the other two for low and high pressure refrigerants.
Since licensing might be mandated in your location, and you may also intend to acquire certification, it’s imperative that you choose an HVAC trade school that will prepare you for both. And since you will most likely be working with refrigerants, make certain that the school you choose prepares you for passing the EPA Section 608 examinations.
HVAC Certificate and Degree Courses
There are a number of choices offered for HVAC training in a technical or vocational school. You can obtain a certificate, an Associate Degree, or a Bachelor’s Degree. Obtaining a certificate will take the minimum amount of time, typically completed in as little as six months, however some programs are longer. A certificate will qualify you for the majority of HVAC positions, particularly if you are licensed and have certification appropriate to the position. The degree training programs might provide a competitive edge for securing employment and will provide more comprehensive training than the certificate programs. Following is a short explanation of each option offered near Camak GA.
- Certificate. Generally requiring a high school diploma, certificate programs are preferred among beginning residential or commercial HVAC technicians. They provide a strong foundation of skills for job opportunities within the trade.
- Associate Degree. The Associate Degree in HVAC program supplies a more detailed knowledge of heating and a/c systems than the certificate program. Generally requiring two years to complete, a number of degrees incorporate an internship or work-study program.
- Bachelor’s Degree. The Bachelor’s Degree in HVAC is tailored more towards a career in management as well as business ownership. Some programs call for an Associate Degree, while others are a conventional 4 year program. In addition to being taught how to service and maintain heating and cooling systems, you will also learn how to design them.
Selecting the ideal credential program will be based on what your future career objectives are, as well as the time and money that you have to invest. One option is to start with a certificate or perhaps an Associate Degree program, and after gaining some experience in the field in Camak GA, later going back to obtain a Bachelor’s Degree. If this is your tactic, be sure to ask the HVAC tech school you are considering about how their returning student program works.
HVAC Online Classes
Enrolling in an HVAC program online is one option to obtaining your education and earning a certificate or degree. Most schools will require some attendance on campus to complete practical training. A number also provide internship or work-study programs in addition to or as an alternative to practical lab work. But since the remainder of the classes can be attended on the web, this approach may be a more practical solution for some Camak GA students that are short on time. And a number of online degree programs are cheaper than other on campus alternatives. Even driving expenses from Camak and study materials may be lessened, helping to make education more affordable. And a large number of online programs are fully accredited (more on this later). So if your career or family obligations have left you with minimal time to attend classes, maybe an HVAC online training program will make it less complicated to fit school into your hectic schedule.
Questions For HVAC Certification Classes
As soon as you have chosen the type of certificate or degree that you desire to acquire, either online or on campus, you can begin to decrease your selection of schools. As you are no doubt aware, there are many HVAC trade schools in the Camak GA area and throughout the Country to select from. That’s why it is extremely important to have a list of relevant qualifications when making school assessments. As earlier mentioned in our opening paragraph, tuition and location will probably be the first 2 factors you will look at. Following are several additional ones that you need to explore before enrolling in your school of choice.
Accreditation. Numerous HVAC trade schools in the Camak GA area have received either a regional or a national accreditation. They can receive Institutional Accreditation, which involves the school’s programs as a whole, or Programmatic Accreditation, which pertains to an individual program, such as HVAC technology. Make certain that the school is accredited by a U.S. Department of Education approved accrediting organization, such as the Accreditation Board for Engineering and Technology. In addition to helping make certain that you obtain a quality education, it can assist in securing financial assistance or student loans, which are frequently not available for non-accredited schools. Furthermore, a number of states mandate that the HVAC training course be accredited for it to qualify for licensing.
High Completion Rates. Ask the HVAC schools you are looking at what their completion rates are. The completion rate is the percentage of students who enroll in and complete the program. A lower completion rate might indicate that students were unhappy with the program and dropped out. It might also signify that the teachers were not competent to instruct the students. It’s similarly important that the schools have high job placement rates. Older and/or more reputable schools may have a broader directory of graduates, which can result in more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has a good reputation within the field, but additionally that it has the network of Camak GA HVAC employers to help graduates secure apprenticeships or jobs.
Apprenticeship Programs. Most HVAC technical programs are taught together with an apprenticeship or an internship program. Those participating technical and vocational programs will help place you in an apprenticeship program within their network of HVAC businesses or trade unions. Check if the schools you are comparing have referring partnerships with local Camak GA HVAC contractors. An apprenticeship not only provides a valuable experience by supplying hands-on training, but it also furnishes employment opportunities and helps to form relationships in the local HVAC professional community.
Modern Facilities. Make sure that the school facilities and the equipment that you will be trained on are state-of-the-art and what you will be working with on the job. If you are currently in an internship or an apprenticeship, consult with the HVAC technician you are working under concerning what you should be looking for. If not, ask a local Camak GA HVAC company if they can provide some pointers. Additionally bear in mind that unless you are able to relocate, the school needs to be within commuting distance of your Camak GA home. Take note that if you decide to enroll in an out-of-state school, besides the added moving costs there may be increased tuition charges compared to in-state residents.
Smaller Classes. It’s important that you get as much one-on-one training as possible, which can be challenging in larger classes. Ask if you can monitor a couple of the classes so that you can see how big they are and experience the interaction between teachers and students. Talk with several of the students and get their opinions regarding class sizes and instruction. Finally, talk with some of the teachers and learn what their level of experience is and what degrees or certifications they have earned.
Flexible Scheduling. Verify that the class schedules for the programs you are assessing are flexible enough to handle your needs. If you are only able to go to classes in the evening or on weekends near Camak GA, verify that the schools you are looking at provide those options. If you can only attend on a part-time basis, make sure that the school you select allows part-time enrollment. Finally, check out what the policy is to make-up classes should you miss any due to work, sickness or family emergencies.
Considering an HVAC School near Camak GA?
Perhaps you are considering enrolling in an HVAC training program in the Camak Georgia area. If so, you may find the following background information about the location of your new school campus both interesting and informative.
The Georgia General Assembly incorporated the place in 1898 as the "Town of Camak", with municipal corporate limits extending in a one-half mile radius from the Georgia Railroad depot. The community was named after James Camak, a railroad promoter. Camak's home in Athens, the Camak House, is listed on the National Register of Historic Places.
As of the census of 2000, there were 165 people, 71 households, and 40 families residing in the town. The population density was 209.2 people per square mile (80.6/km²). There were 84 housing units at an average density of 106.5 per square mile (41.1/km²). The racial makeup of the town was 46.06% White, 53.33% African American and 0.61% Native American.
There were 71 households out of which 21.1% had children under the age of 18 living with them, 43.7% were married couples living together, 12.7% had a female householder with no husband present, and 42.3% were non-families. 39.4% of all households were made up of individuals and 16.9% had someone living alone who was 65 years of age or older. The average household size was 2.32 and the average family size was 3.15.
HVAC Trade School Camak GA
Choosing the ideal HVAC training program is a critical first step toward a fulfilling career in the heating and cooling field. You originally came to this website because you wanted more information regarding HVAC Trade School. However, as we have covered in this article, you should pick an Heating and Cooling training program and a degree or certificate program that are both accredited and have outstanding reputations within the HVAC field. Other things to look for are ample hands-on training and state-of-the-art facilities. You need to go to each of the schools in person that you are most interested in to inspect the campus and talk with both the faculty and current students. Try to get a feel for the quality of the instruction and the interaction between them. Also, inquire about scheduling options and whether or not night or weekend classes are available if needed. And don’t forget to ask about financial assistance and student loan options also. If you ask the proper questions as we have detailed in our checklist for comparing schools, you’ll be able to filter your choices so that you can make an informed decision. With the proper training, hard work and dedication, you can ultimately become a licensed HVAC technician in Camak GA.
More Hot and Cool Locations in Georgia
Business Results 1 - 10 of 13