How to Enroll In the Right Heating and Cooling School near Columbia Alabama
Once you have made a decision on a career as a heating and air conditioning professional, the next action is to look for an HVAC vocational school near Columbia AL. But with so many to select from, how do you select the right one to get the training that you require? A number of potential students will make their selection based solely on the cost of tuition or how close the school is to their residence. Even though these are important concerns, they are not the only ones to evaluate. A few of the other factors that you need to look into are the graduation rates of the HVAC schools, their reputations, and if they are accredited by professional trade organizations. Those and additional benchmarks will be covered in more detail later within this article. But before we examine how to pick an HVAC vocational school, let’s take a look at what a heating and a/c specialist does to become a licensed professional tradesman.
How to Become an HVAC Specialist
HVAC is an acronym that is widely used in the trade that stands for “Heating, Ventilation and Air Conditioning”. HVAC techs specialize in the installation, repair and maintenance of air conditioners, furnaces, boilers, hot water heaters and heating systems. As professional tradesmen, they are commonly mandated to be licensed, though every state and local municipality has its own prerequisites. Attaining professional certification is not required, but a voluntary means for Columbia AL HVAC technicians to establish that they are highly skilled and accomplished in their area of expertise. There are many acknowledged certifications within the trade that are offered. Below are a few of the significant ones.
- North American Technician Excellence (NATE). NATE is a nationally acknowledged certification for HVAC techs. The certification is attained by passing a proficiency examination and can be acquired in one or more specialties.
- HVAC Excellence. This certification makes available both a professional and a master specialist credential. Two years of field experience as well as passing a comprehensive exam are needed for the professional level certification. Master specialists need to have 3 years of experience in addition to a passing score on the professional level exam. Similar to NATE, certifications are offered in several specialties.
- EPA Section 608. This certification is required for techs that work with refrigerants. There are three forms of certification available, one for small appliances, and the other two for low and high pressure refrigerants.
Considering that licensing might be required in your location, and you may also desire to earn certification, it’s essential that you choose an HVAC trade school that will prepare you for both. And since you will probably be working with refrigerants, make sure that the program you pick readies you for passing the EPA Section 608 examinations.
HVAC Degree and Certificate Training Programs
There are a variety of choices offered for HVAC training in a vocational or trade school. You can obtain a certificate, an Associate Degree, or a Bachelor’s Degree. Earning a certificate will take the minimum amount of time, often achieved in just 6 months, although some programs are longer. A certificate will train you for most HVAC positions, particularly if you are licensed and have certification related to the position. The degree programs may provide a competitive edge for securing employment and will provide more comprehensive training than the certificate programs. Below is a short explanation of each credential offered near Columbia AL.
- Certificate. Usually requiring a high school diploma, certificate programs are very popular among entry level residential or commercial HVAC technicians. They furnish a strong foundation of skills for job opportunities within the industry.
- Associate Degree. The Associate Degree in HVAC program provides a more comprehensive understanding of heating and cooling systems than the certificate program. Usually requiring two years to finish, some degrees feature an internship or work-study program.
- Bachelor’s Degree. The Bachelor’s Degree in HVAC is tailored more for a career in management or even business ownership. Some programs require an Associate Degree, while others are a standard four year program. In addition to learning how to service and maintain heating and cooling systems, you will also study how to design them.
Choosing the appropriate credential program will be based on what your long term career goals are, as well as the time and money that you have to invest. One approach is to start with a certificate or even an Associate Degree program, and after getting some experience in the trade in Columbia AL, subsequently going back to earn a Bachelor’s Degree. If this is your strategy, make certain to ask the HVAC technician school you are looking at about how their returning student program works.
HVAC Online Classes
Choosing an HVAC school online is one possibility to obtaining your education and receiving a certificate or degree. Almost all schools will call for some attendance on campus to complete hands on training. A number also sponsor internship or work-study programs in addition to or as an alternative to practical lab work. But since the balance of the classes may be participated in online, this alternative may be a more accessible solution for many Columbia AL students that are short on time. And many online degree programs are more economical than other on campus options. Even travelling expenses from Columbia and study materials can be reduced, helping to make education more budget-friendly. And many online schools are fully accredited (more on this later). So if your work or family commitments have left you with little time to attend classes, perhaps an HVAC online training program will make it less complicated to accommodate school into your active lifestyle.
What to Ask HVAC Trade Schools
Once you have selected the type of certificate or degree that you want to attain, either on campus or online, you can start to decrease your selection of schools. As you are probably aware, there are many HVAC vocational schools in the Columbia AL area and throughout the USA to choose from. That’s why it is very important to have a checklist of key qualifiers when making school evaluations. As formerly mentioned in our opening paragraph, tuition and location will undoubtedly be the initial 2 variables you will look at. Following are some additional ones that you should explore before enrolling in your school of choice.
Accreditation. Numerous HVAC trade schools in the Columbia AL area have attained either a regional or a national accreditation. They may acquire Institutional Accreditation, which involves the school’s programs overall, or Programmatic Accreditation, which relates to an individual program, such as HVAC technology. Confirm that the school is accredited by a U.S. Department of Education recognized accrediting organization, which includes the Accreditation Board for Engineering and Technology. Along with helping guarantee that you acquire a superior education, it can assist in obtaining financial assistance or student loans, which are in many cases not available for non-accredited programs. Also, some states mandate that the HVAC training course be accredited in order to be approved for licensing.
High Completion Rates. Ask the Heating and Cooling schools you are looking at what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the course. A low completion rate could suggest that students were disappointed with the course and dropped out. It could also indicate that the instructors were not competent to instruct the students. It’s similarly imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive directory of alumni, which can result in more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has a good reputation within the field, but additionally that it has the network of Columbia AL HVAC employers to help grads obtain apprenticeships or jobs.
Apprenticeship Programs. Numerous HVAC training programs are taught along with an internship or an apprenticeship program. Those participating trade and technical programs will help place you in an apprenticeship program inside their network of Heating and Cooling businesses or labor unions. Ask if the schools you are comparing have working partnerships with local Columbia AL HVAC companies. An apprenticeship not only provides a valuable experience by providing practical training, but it also provides job opportunities and helps to form relationships in the local HVAC professional community.
Modern Facilities. Make certain that the campus facilities and the tools that you will be instructed on are state-of-the-art and what you will be using in the field. If you are already in an internship or an apprenticeship, consult with the HVAC technician you are working with regarding what you should be expecting. If not, ask a local Columbia AL HVAC contractor if they can give you some tips. Also bear in mind that unless you are willing to move, the school must be within driving distance of your Columbia AL residence. Remember that if you decide to attend an out-of-state school, in addition to relocation costs there can be higher tuition fees compared to in-state residents.
Smaller Classes. It’s important that you get as much personalized training as possible, which can be difficult in larger classes. Ask if you can monitor a few of the classes so that you can see how big they are and witness first hand the interaction between teachers and students. Talk to several of the students and get their feedback relating to class sizes and instruction. Last, talk to a few of the teachers and learn what their level of experience is and what certifications or degrees they hold.
Flexible Scheduling. Verify that the class schedules for the schools you are assessing are flexible enough to handle your needs. If you can only attend classes in the evening or on weekends near Columbia AL, verify that the programs you are considering provide those options. If you can only attend on a part-time basis, make sure that the school you select offers part-time enrollment. Also, check out what the protocol is to make-up classes should you miss any because of work, illness or family issues.
Considering an HVAC School near Columbia AL?
Perhaps you are considering enrolling in an HVAC training program in the Columbia Alabama area. If so, you may find the following background information about the location of your new school campus both interesting and informative.
At the age of 18 Columbia was hired to assist Bill Sienkiewicz in illustrating Alan Moore's ambitious Big Numbers series. When Sienkiewicz withdrew from the series in 1990 after the release of the first two issues, Moore and his backers at Tundra Publishing asked the young Columbia to become its sole artist. In 1992, with no more issues released, Columbia himself left the project under a cloud of rumors and accusations, including claims that he had destroyed his own artwork for Big Numbers #4. Columbia declined to address the subject publicly for several years, writing in a 1998 letter to The Comics Journal that "I could easily launch into a tirade about the extensive horror of my Tundra experience, but I much prefer the very entertaining and conflicting accounts already in circulation." In later statements he confirmed that he destroyed his artwork but disputed other claims by the principal figures in the fiasco.
In a 2011 article reflecting on his Big Numbers experience, Sienkiewicz wrote that he and Columbia had long since reconciled over the matter, and that he was content to "[c]halk the feud up to the folly of youth."
Columbia's first solo comic book, Doghead, was released by Tundra Publishing in 1992. It contains three short stories, two in black and white and one in full color. Paul Gravett described it as "three dark, stylish tales, indebted to Sienkiewicz and McKean but with hints of [Columbia's] emerging singular identity".
How To Become a HVAC Technician Columbia AL
Selecting the ideal HVAC training program is an important first step toward a gratifying career in the heating and air conditioning industry. You originally came to this website because you wanted more information regarding How To Become a HVAC Technician. However, as we have covered in this article, you should choose an Heating and Cooling technical school and a certificate or degree program that are both accredited and have outstanding reputations within the HVAC trade. Other things to search for are ample hands-on training and state-of-the-art facilities. You should check out each of the schools personally that you are most interested in to tour the campus and talk with both the faculty and current students. Try to get a feel for the quality of the training and the interaction between them. Also, ask about scheduling options and if evening or weekend classes are offered if needed. And don’t forget to ask about financial aid and student loan options also. If you ask the right questions as we have outlined in our guidelines for comparing schools, you’ll be able to narrow down your options so that you can make an informed decision. With the right training, hard work and dedication, you can eventually become a licensed HVAC specialist in Columbia AL.
More Hot and Cool Locations in Alabama
Business Results 1 - 10 of 14